- Nominal Input Level
- -20 dBu
- Input Impedance
- 1 M ohm
- Nominal Output Level
- -20 dBu
- Output Impedance
- 1 k ohm
- Recommended Load Impedance
- 10 k ohms or greater
- Bypass
- Buffered bypass
- Controls
- MODE knob
RATE knob
DEPTH knob
RES (Resonance)/MANUAL knob
Pedal switch - Indicator
- CHECK indicator (Used for indication of check battery)
- Connectors
- GUITAR IN jack: 1/4-inch phone type
BASS IN jack: 1/4-inch phone type
OUTPUT A (MONO) jack: 1/4-inch phone type
OUTPUT B jack: 1/4-inch phone type
DC IN jack - Power Supply
- Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately) - Current Draw
- 40 mA
- Expected battery life under continuous use
- Carbon: Approx. 3 hours
Alkaline: Approx. 10 hours
*These figures will vary depending on the actual conditions of use. - Accessories
- Owner's manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22) - Options (sold separately)
- AC adaptor: PSA series
- Size and Weight
- Width
- 73 mm
2-7/8 inches - Depth
- 129 mm
5-1/8 inches - Height
- 59 mm
2-3/8 inches - Weight (including battery)
- 435 g
1 lb - * 0 dBu = 0.775 Vrms.
- * The specifications are subject to change without notice.
Pay in installments of $6.22 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bass flanger pedal Boss BF-3 Flanger Guitar Effect Pedal – Tegeler MusicThe Flanger Gets a Face Lift Building on the 20 year legacy of the famous BOSS BF 2, the new BF 3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate Pan) create stereo flanging with incredible depth even Slicer type effects and sounds that seem to "swirl" around the listener. An instant classic. BOSS' best flanging effects in a compact
The Flanger Gets a Face-Lift
Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS five-year warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 1
No returns and no support. If it doesn't work properly, too bad.
Style: Printer & Inks, Style: Printer & Inks
I was fairly happy with my Epson ET 2800, but was told that I'd get better colors with the F170. So I bit the bullet.
The installation went smoothly and I was printing in short order. It was when I started printing items that had some dark gray that I noticed the problem. It was printing green. I contacted Epson tech support and they answered the phone almost immediately. (And how rare is that??)
The woman I spoke with seemed to be familiar with the problem and advised me to modify the printer preferences and change the color correction from "ICM" to "No color correction". Well, it wasn't printing green anymore. Now the grays were brown. At this point, she ran out of ideas and gave me an email address for the second level of tech support and asked if I'd send a photo of the printed fabrics showing the problem. I did. That was over three weeks ago. I've sent a couple of followup emails, but they're ignoring me.
But the best news was discovering that there are no returns on this product. I didn't think that was a thing with Amazon and I've never had any problems before. So now the 30-day return window is about to elapse and it appears that I'm stuck with an oversized doorstop.
In the photo I'm including with this review, the fabric on the upper-left was printed with my Epson ET 2800. On the upper right, the F170 with ICM color correction. On the bottom, the F170 with no color correction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
★★★★★ 5
Epson SureColor F170 Sublimation Printer Rocks!
Style: Printer & Inks, Style: Printer & Inks
TI’m a newbie at sublimation, and this is my first sublimation printer. I love it! I can’t wait to make more things! I like that it’s not too large, but still can print up to 8.5x14”. The quality seems to be really good, but I also don’t have any other printer to compare it to. This was my very first project! I’m very happy with it so far!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 5
Great product, quality colors and vibrant prints
Color: 1BK/1C/1Y/1M
Best Sublimation Ink I have found so far. Great size bottles for the price you pay. Lasts a long time and the colors print great and when you press the print the colors come out BEAUTIFUL and VIBRANT! Dries quickly after printing so no worries on smudging but even after sitting over a month on the paper still presses like you printed it that day!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Consistent, Vibrant Results That Match My Designs Perfectly
Color: 1BK/1C/1Y/1M
I’ve been consistently purchasing this Hiipoo sublimation ink for my sublimation printers, and I’ve been extremely pleased with the results. The print quality is excellent, with vibrant colors and clean transfers every time.
What I really appreciate is how true the final product turns out compared to my original designs. The colors stay accurate, and the finished results look exactly the way I intended, which is very important for my projects and products.
This ink has been reliable and consistent, and I will definitely continue using it for my sublimation work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 5
Perfect to the job
Color: 1BK/1C/1Y/1M
No issues with this ink. Used it to turn a printer into sublimation printing and the ink is perfect and easy to fill.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
recommand products
Radon Relate 8.0 Refurbished E-Bike
22.72
28" Herren E-Bike Trekking Fahrrad TERRA TR1 BOSCH Performance Line PX Smart System POWERTUBE 800 Wh 11 x Gang SHIMANO XT RD-M8130 SGS. Empfehlung
27.65
Fahrradanhänger Hund
23.23
HEPHA Trekking 7 Ultra – HEPHA E-Bike
20.49
Conway Cairon T 2.0 Diamant 625 Wh | E-Bike Trekking Herren
25.97